Hi All,
I have a customer with over 150 access points that needs to be setup in flex-connect mode. Usually I choose a separate subnet for APs and SSIDs of /23 or .24, here they have some limitations with vlan/IP subnets available for use.
So I am thinking of using /20 or /22 for both AP management and locally switched SSID. Do you foresee any issue with using a /20 or /22 for both AP and SSID. Just concerned about broadcast traffic from wired to wireless with the number of APs they are going to have. I havent used a /22 subnet before so want to know from others who have used it, if this would cause any issues?
Thanks
