FlexConnect Standalone EAP-TLS Local Authentication

[Alex Pham]

Hi,

I understand that there is a limitation of 100 static users with FlexConnect Standalone Local Authentication and these users have to be pre-configured in WLC with username and password. However, EAP-TLS will not use username/password for authentication, it uses certificate instead.

May I know if username/password is still required during FlexConnect Standalone EAP-TLS Local Authentication?

Thank you.

Regards,

Alex

[Rasika Nayanajith]

As you already stated EAP-TLS is certificate based.

In FlexConnect standalone mode, your AP act as RADIUS server

HTH

Rasika

*** Pls rate all useful responses ***

[Alex Pham]

Hi Rasika,

Do i still need to provide local users with username/password in WLC?

For EAP-TLS, the limitation of 100 users authentication still applies, is it correct?

Thanks.

Alex