05-13-2014 03:13 AM - edited 07-05-2021 12:49 AM
I'm working on a new wlc installation for a customer. I've create a wlan with a customized web-auth. page that uses an external freeradius sms gw. I've setup FlexConnect, so the wlan is locally switched but the WLC is the authenticator.
The problem is that the authenticated usernames (in this case phone numbers) are not being passed back to the controller log which we need for tracking purposes. I would understand this behavior if we were using local auth but we aren't. The WLC logged the user names properly before activating FlexConnect, when using local mode.
Appreciate any suggestions!
07-11-2014 06:35 AM
FYI
Fore some reason we were using Passthrough and not Authentication on the SSID. After changing to Authentication and opening port 1812 all the way through to the radius server, everything worked. :)
07-13-2014 08:33 AM
Its always great when the OP post the solution! Great job
Scott
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide