Flexible bandwidth restriction for clients (wlc5520/C9800)

[dijix1990]

If I want to restrict bandwidth per client on the wlc 5520 for clients on the some ap's it it possible? 

For example

SSID WiFi for two branches

branch 1 bandwith per clients 10mbps

branch 2 bandwith per clients 30mbps

maybe is it possible on the 9800? bandwith per location I mean

[JPavonM]

Limiting the speed of a client is not a best practice as this will impact other clients as they will have to wait more time to transmit.

If you want to go ahead you can do it statically on the SSID with this deployment guide (https://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-bdr-limit-guide-00.html) or use AAA override (https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-2/config-guide/b_cg82/b_cg82_chapter_0111110.pdf).

You can set these parameters in Cisco ISE:

• Aire-Real-Time-Bandwidth-Average-UpStream-Contract = x
• Aire-Data-Bandwidth-Average-DownStream-Contract = x
• Aire-Data-Bandwidth-Burst-UpStream-Contract = x
• Aire-Real-Time-Bandwidth-Burst-DownStream-Contract = x
• Aire-Real-Time-Bandwidth-Average-DownStream-Contract = x
• Aire-Real-Time-Bandwidth-Burst-UpStream-Contract = x
• Aire-Data-Bandwidth-Average-UpStream-Contract = x
• Aire-Data-Bandwidth-Burst-DownStream-Contract = x

[dijix1990]

Thanks for answering, but I can't get access to link aaa override 

[dijix1990]

So pity that we doesn't have an flexible shaper tool