Getting an Air 2700 AP to join to a 5508 WLAN Contoller

[corey.cheever1]

I'm doing a new setup of a 5508 WLAN Controller and Air-2700 WAP's the AP's wont joing to the controller the controller does see them I do get and error on the AP reading

Not in Bound state.
*Mar  1 00:03:40.943: %LWAPP-4-CLIENTEVENTLOG: Invoking capwap discovery
*Mar  1 00:03:44.015: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 172.16.151.192, mask 255.255.252.0, hostname ap00221

Not in Bound state.
*Mar  1 00:05:16.399: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 172.16.151.192, mask 255.255.252.0, hostname ap00221

I know its a configuration problem I just not clear on how to fix it.

[George Stefanick]

What is the full part number of your access points. 

[corey.cheever1]

Air-CAP2702E-B-K9

[George Stefanick]

what controller code ?

[corey.cheever1]

I'm confused on that question.

[George Stefanick]

On the 5508 

[corey.cheever1]

attached is the code

[George Stefanick · Accepted solution]

As i suspected you are running older code. See matrix http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Id suggest the latest 8.0 code or if you like to cowboy go to the latest 8.2.

If this was helpful and fixes your issues kindly rate helpful post! 

Thanks

Product Version.................................. 7.4.121.0

[corey.cheever1]

That was the problem and I went Cow boy using 8.2 so far no problems.