03-18-2010 08:05 AM - edited 07-03-2021 06:37 PM
So I have an interesting scenario to run by the group, I haven't done this but was wondering if anyone else had tried it.
Scenario: is 5 WLC's running 6.0.188.0, One guest SSID, and One H-REAP guest SSID.
WLC#1: SNMP Name is WLC01, Virtual Interface DNS Name is GWLC.somewhere.com, Virtual Interface IP is 1.1.1.1
WLC#2: SNMP Name is WLC02, Virtual Interface DNS Name is GWLC.somewhere.com, Virtual Interface IP is 1.1.1.1
WLC#3: SNMP Name is WLC03, Virtual Interface DNS Name is GWLC.somewhere.com, Virtual Interface IP is 1.1.1.1
WLC#4: SNMP Name is WLC04, Virtual Interface DNS Name is GWLC.somewhere.com, Virtual Interface IP is 1.1.1.1
WLC#5: SNMP Name is WLCDMZ, Virtual Interface DNS Name is GWLC.somewhere.com, Virtual Interface IP is 1.1.1.1
So part 1 of my question is does the above configuration cause any issues with the controllers?
Part 2 of my question is can you request a single SSL certificate for the hostname GWLC.somewhere.com and install it on all the controllers?
The reason for having the certificate on all the controllers is because of the H-REAP Locally Switched SSID.
Anyone have experience with this, input, thoughts?
Thanks.
Solved! Go to Solution.
03-18-2010 08:48 AM
Yes, when you setup the controllers like that you can use the same cert on every controller.
03-18-2010 08:48 AM
Yes, when you setup the controllers like that you can use the same cert on every controller.
03-18-2010 08:51 AM
Dan,
Thanks for the response, have you done this configuration before? Just curious.
Thanks,
Kayle
03-18-2010 08:54 AM
I have seen TAC cases come in on this exact setup.
03-20-2010 09:57 PM
I too have seen numerous cases on this.
Bottom line is that as long as your HREAP Guests can resolve GWLC.somewhere.com through DNS (as 1.1.1.1), then this should work.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide