Solved: Guest Access with a 1240AG

rmwhite59 · ‎03-27-2008

I have a 1240AG connected to a 3560 connected to a ASA5505 securtiy plus.

I can not get the vlans to work correctly. Only one SSID will work at a time and only when it is connected to the native vlan.

I have attached my configs

mirek.tichy_2 · ‎03-31-2008

Hi, you have a mismach in native VLAN config. I suppose, that VLAN 1 is for the management and VLAN 20/30 are for users.

So firstly - make interface FastEthernet0.1 to be native and Fa0.20 to be taged by 20 and bridge-group 20. BVI 1 will be automatically connected to Fa0.1 and to the VLAN 1 on the switch.

Secondly - the same on interface Dot11Radio X.20. Dot11RadioX.1 can be removed.

View solution in original post

mirek.tichy_2 · ‎03-31-2008

Hi, you have a mismach in native VLAN config. I suppose, that VLAN 1 is for the management and VLAN 20/30 are for users.

So firstly - make interface FastEthernet0.1 to be native and Fa0.20 to be taged by 20 and bridge-group 20. BVI 1 will be automatically connected to Fa0.1 and to the VLAN 1 on the switch.

Secondly - the same on interface Dot11Radio X.20. Dot11RadioX.1 can be removed.