03-27-2008 04:37 PM - edited 07-03-2021 03:36 PM
I have a 1240AG connected to a 3560 connected to a ASA5505 securtiy plus.
I can not get the vlans to work correctly. Only one SSID will work at a time and only when it is connected to the native vlan.
I have attached my configs
Solved! Go to Solution.
03-31-2008 02:17 AM
Hi, you have a mismach in native VLAN config. I suppose, that VLAN 1 is for the management and VLAN 20/30 are for users.
So firstly - make interface FastEthernet0.1 to be native and Fa0.20 to be taged by 20 and bridge-group 20. BVI 1 will be automatically connected to Fa0.1 and to the VLAN 1 on the switch.
Secondly - the same on interface Dot11Radio X.20. Dot11RadioX.1 can be removed.
03-31-2008 02:17 AM
Hi, you have a mismach in native VLAN config. I suppose, that VLAN 1 is for the management and VLAN 20/30 are for users.
So firstly - make interface FastEthernet0.1 to be native and Fa0.20 to be taged by 20 and bridge-group 20. BVI 1 will be automatically connected to Fa0.1 and to the VLAN 1 on the switch.
Secondly - the same on interface Dot11Radio X.20. Dot11RadioX.1 can be removed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide