Guest SSID vpn (ipsec or pptp) passthrough with WLC

[boshardy1]

I have a 4402 and need my guest users to be able to do vpn (ipsec or pptp) back to their companies. Can I do this?

[andrew.prince]

Yes you can - depending on the version of software - the following links will give you detailed configuration examples to configure VPN passthru:-

WLC ver 4.0

http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1084908

WLC ver 4.1

http://www.cisco.com/en/US/docs/wireless/controller/4.1/configuration/guide/c41wlan.html#wp1084908

WLC ver 4.2

http://www.cisco.com/en/US/docs/wireless/controller/4.2/configuration/guide/c42wlan.html#wp1084908

WLC ver 5.0

http://www.cisco.com/en/US/docs/wireless/controller/5.0/configuration/guide/c5wlan.html#wp1084908

HTH

[boshardy1]

But what would I enter under VPN gateway address. These are going to be vendors/guests using this so there is not just one VPN gateway address (If I read correctly that needs to be IP of device terminating the VPN connection).

[andrew.prince]

You would enter "0.0.0.0" = any, just like in an static route.

HTH