HA SS0 'Invalid Input'

[j22dodge]

Hello,

I am trying to configure HA-SSO (RMI+RP) between two 9800-CL controllers.  Both running 17.6.4.  Chassis 1 seems to work just fine.  But chassis two gives me this message every time.

"  redun-management interface chassis 1 address 10.89.240.114 chassis 2 address 10 ^.89.240.115
Invalid input detected at '^' marker.  "

Any ideas about what the issue could be?

Thanks in advance.

[Flavio Miranda]

Hi

 Did you add some space or characte on the IP address?

This a real log copy or did you type it?

"  redun-management interface chassis 1 address 10.89.240.114 chassis 2 address 10 ^.89.240.115

It seems theres something wrong 

[j22dodge]

Hello,

That is copied from the log error.

[Flavio Miranda]

Did you try to delete the IP and enter again? Maybe do from CLI instead

[j22dodge]

I have tried Deleting the IP and re-adding it.  Also does not seam to work.  I have also tried configuring it through the CLI, it takes, but they do not pair.

[Scott Fella]

Factory reset the secondary unit and start over.  That should fix the issue if the issue is with the secondary.