Having issues with joining AC Wave 2 APS to WLC

[nmack25]

Hello!

I bought a WLC 5508 with 75 AP licenses, but the AC Wave 2 APs are not adopting. WLC has been updated to: "AIR-CT5500-K9-8-5-182-0.aes". Anyone have any ideas on how to solve this?

INFO ON NETWORK:

Wanted to switch from Mobility Express to WLC. All APs have been reset using mode button on back.

3702: Joined successfully

2702:Joined successfully

1810w error:

2802 error:

 3802 error:

 

WLC screenshots:

Network Summary:

Let me know what you think. Yes the UDM-SE is not a "pro" device. Just using it since no licensing and I use protect/access.

More info:

I set up the WLC using the initial CLI configuration.

I am using port 1 on the WLC

Thanks,

Noah

[nmack25]

Now having this issue with my 3702s

[marce1000]

 - You seem to have APs with expired certificate(s) ; according to https://www.cisco.com/c/en/us/support/docs/field-notices/639/fn63942.html   try :
                         ap cert-expiry-ignore mic enable
                         ap cert-expiry-ignore ssc enable

 M.
                         

[nmack25]

Getting this error.

% Invalid input detected at '^' marker.

 

[nmack25]

Got the aps showing up, but none register

 

[marce1000]

 - My bad ; the correct commands are :
                         config  ap cert-expiry-ignore mic enable
                         config  ap cert-expiry-ignore ssc enable

 M.

[nmack25]

Still getting the same issue....weird

[marce1000]

 As per https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html upgrade to : 
                       https://software.cisco.com/download/specialrelease/2702eede2b47a5c3bb40795bbe836af6  
 and try again , 

 M.