12-25-2013 07:46 AM - edited 07-04-2021 11:50 PM
Dear All,
I am having a problem with WCL 5508 and 3750 cisco, we are gettin a long ping time, it doesnt good working, then our same clinet doesnt take a Ip address From 5508 dhcp scope. what can i do about them.
ping time is so annoying...
12-25-2013 12:06 PM
Most likely this is a connectivity issue between your switch & WLC. I would check the physical connectivity & verify no layer 2 related issues like errors, duplex issues, drops,etc
Here is sample CLI outputs I would check in the switch & WLC. Please provide same output in your case.
C3750#sh interfaces g1/0/27 | in duplex|CRC|put
Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000BaseTX SFP
input flow-control is off, output flow-control is unsupported
Last input 00:00:15, output 00:00:31, output hang never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 3000 bits/sec, 5 packets/sec
28131572 packets input, 19958363087 bytes, 0 no buffer
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 63594 multicast, 0 pause input
0 input packets with dribble condition detected
30743473 packets output, 19753674257 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
(WLC) >show stats port summary
Link Pkts In Pkts In Pkts Out
Pr Status Pkts In Pkts Out Bcast Errors Errors Collisions
-- ------ ------- ------- ------- ------- ------- ----------
1 Up 30742315 33596605 44901 0 0 0
Also provide the "show sysinfo" of your WLC
HTH
Rasika
**** Pls rate all useful responses ****
12-26-2013 09:16 AM
Dear Rasika,
so sorry my late replay because, i was ill... so you can see the details on attechment file. our problem still countine. please help us about them.
-----------------------------------------------------------------------------------------------------------------------------------------------------
(Cisco Controller) >show stats port summary
Link Pkts In Pkts In Pkts Out
Pr Status Pkts In Pkts Out Bcast Errors Errors Collisions
-- ------ ------- ------- ------- ------- ------- ----------
1 Up 2011439 987794 75253 0 0 0
2 Down 24105 668 19505 0 0 0
Total 2035544 988462 94758 0 0 0
----------------------------------------------------------------------------------------------------------------------------------------------------
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.6.100.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB consol
2.2
Build Type....................................... DATA + WPS
System Name...................................... TestWLC01
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... 10.1.1.2
Last Reset....................................... Power on reset
System Up Time................................... 1 days 3 hrs 20 mins 27 secs
System Timezone Location......................... (GMT +2:00) Jerusalem
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... TR - Turkey
Operating Environment............................ Commercial (0 to 40 C)
--More-- or (q)uit
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +41 C
External Temperature............................. +21 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 2
Number of Active Clients......................... 1
Burned-in MAC Address............................ C0:67:AF:1A:64:20
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 25
---------------------------------------------------------------------------------------------------------------------------------------------------
Full-duplex, 1000Mb/s, media type is 10/100/1000BaseTX
input flow-control is off, output flow-control is unsupported
Last input 00:00:18, output 00:00:00, output hang never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Output queue: 0/40 (size/max)
5 minute input rate 6000 bits/sec, 6 packets/sec
5 minute output rate 40000 bits/sec, 28 packets/sec
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
12-26-2013 12:26 PM
did you upgrade this WLC to 7.6.x recently or does it come with this image ? Also when did you notice this ? If this occur after an upgrade, I would do a downgrade & test it.
If not, I would change the following one at a time & see if that helps
1. Patch lead
2. WLC port from 1 to 2 & made the necessary config change on WLC
3. 3750 Switch port to different one.
Also post output of below commands to see any config issues
(WLC) >show interface detailed management
SW# show run inter gx/x (x/x is WLC connected switchport)
HTH
Rasika
**** Pls rate all useful responses *****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide