02-27-2013 02:59 AM - edited 07-03-2021 11:37 PM
Hi there,
What is the best way to isolate hosts on WiFi network managed with 4400 controllers so they only see def gw but not each other, something like "switchport protected" but for WiFi ....
Thanks
Marcin
Solved! Go to Solution.
02-27-2013 08:29 AM
The P2P blocking only works for users associated to access points on the same WLC. If you have other WLC's it will not work. There is no other feature to do this on the WLC side.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
02-27-2013 03:00 AM
On the WLAN advanced tab there should be a setting for P2P Blocking Action. Set that to drop if you don't want P2P connection.
Sent from Cisco Technical Support iPhone App
02-27-2013 08:25 AM
Hi Scott,
Tried it and i can still ping other hosts, some more suggestions required
Knid regards
Marcin
02-27-2013 08:29 AM
The P2P blocking only works for users associated to access points on the same WLC. If you have other WLC's it will not work. There is no other feature to do this on the WLC side.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
02-27-2013 08:41 AM
oh ok, i have 2x4400 so i gues this explains it. thank you for your help.
Knid regards
Marcin
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide