Host isolation on one SSID

[piesio.marcin]

Hi there,

What is the best way to isolate hosts on WiFi network managed with 4400 controllers so they only see def gw but not each other, something like "switchport protected" but for WiFi ....

Thanks

Marcin

[Scott Fella]

On the WLAN advanced tab there should be a setting for P2P Blocking Action. Set that to drop if you don't want P2P connection.

Sent from Cisco Technical Support iPhone App

[piesio.marcin]

Hi Scott,

Tried it and i can still ping other hosts, some more suggestions required

Knid regards

Marcin

[Scott Fella · Accepted solution]

The P2P blocking only works for users associated to access points on the same WLC.  If you have other WLC's it will not work.  There is no other feature to do this on the WLC side.

Thanks,

Scott

Help out other by using the rating system and marking answered questions as "Answered"

[piesio.marcin]

oh ok, i have 2x4400 so i gues this explains it. thank you for your help.

Knid regards

Marcin