12-18-2015 11:57 PM - edited 07-05-2021 04:25 AM
Hi buddies,
I've deployed a vwlc 8.0.120 and some Cisco 2700 series APs.
I want to know is there any way to find out each AP is neighbor with which APs through vWLC?
BR,
Majid.
Solved! Go to Solution.
12-20-2015 12:13 AM
Is there anyway to see this in vWLC GUI?
This method will depend on the firmware the vWLC is running.
1. Monitor > Access Points > Radios > Choose either 802.11a or 802.11b.
2. To the right of the AP of your choice, there's a drop down box. Choose Detail.
3. Scroll all the way to the bottom under the heading "Rx Neighbor Information".
12-19-2015 03:57 AM
WLC CLI command: sh ap auto-rf 802.11a <AP Name>
12-19-2015 09:41 PM
Thanks Leo,
Is there anyway to see this in vWLC GUI?
BR
12-20-2015 12:13 AM
Is there anyway to see this in vWLC GUI?
This method will depend on the firmware the vWLC is running.
1. Monitor > Access Points > Radios > Choose either 802.11a or 802.11b.
2. To the right of the AP of your choice, there's a drop down box. Choose Detail.
3. Scroll all the way to the bottom under the heading "Rx Neighbor Information".
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide