05-15-2017 08:30 PM - edited 07-05-2021 07:01 AM
Hello.
We bought AIR-CAP2702I-Q-K9 and tried to convert it to the autonomous mode,but failed.
We failed to issue the command "capwap ap autonomous".
=========================================
AP70db.98b6.57b4#capwap ap ?
ant-band-mode antenna band mode
controller lwapp primary controller
daisy-chaining daisy-chaining enable/disable
dot1x Configure the dot1x username and password
ethernet Configure ethernet parameters like vlan tag id
hostname Configure ap hostname
ip lwapp ap ip command
log-server Configure the syslog server where all LWAPP errors will be
logged
mode Configure an AP mode
preferred-domain Configure the preferred domain used for DNS based
controller discovery
preferred-mode capwap mode of operation ipv4 or ipv6
primary-base Primary Controller
primed-timer primed-timer enable/disable
secondary-base Secondary Controller
tertiary-base Tertiary Controller
=========================================
AP70db.98b6.57b4#show version
Cisco IOS Software, C2700 Software (AP3G2-RCVK9W8-M), Version 15.3(3)JD, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2016 by Cisco Systems, Inc.
Compiled Fri 29-Jul-16 04:10 by prod_rel_team
ROM: Bootstrap program is C2700 boot loader
BOOTLDR: C2700 Boot Loader (AP3G2-BOOT-M) LoaderVersion 15.2(4)JB5m, RELEASE SOFTWARE (fc2)
AP70db.98b6.57b4 uptime is 1 hour, 12 minutes
System returned to ROM by power-on
System image file is "flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-xx"
Last reload reason:
=========================================
AP70db.98b6.57b4#show flash:
Directory of flash:/
2 -rwx 1048 Mar 1 1993 00:00:21 +00:00 private-multiple-fs
3 -rwx 155 Jan 1 1970 00:01:57 +00:00 env_vars
4 -rwx 0 Mar 1 1993 00:00:35 +00:00 config.txt
38 drwx 576 Jan 1 1970 00:13:56 +00:00 ap3g2-rcvk9w8-mx
48 drwx 2496 Jan 1 1970 00:20:02 +00:00 ap3g2-k9w7-mx.153-3.JD
40900608 bytes total (20188160 bytes free)
=========================================
AP70db.98b6.57b4#show boot
BOOT path-list: flash:/ap3g2-rcvk9w8-mx/ap3g2-rcvk9w8-mx
Config file: flash:/config.txt
Private Config file: flash:/private-config
Enable Break: yes
Manual Boot: no
Enable IOS Break: no
HELPER path-list:
NVRAM/Config file
buffer size: 32768
Mode Button: on
Radio Core TFTP:
AP70db.98b6.57b4#
======================================
Please answer.
Solved! Go to Solution.
05-16-2017 12:01 AM
Here are the posts and video to convert LAP to AAP.
https://www.youtube.com/watch?v=d7XTGGrUYBA
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://damn.technology/convert-cisco-lightweight-ap-autonomous
https://itthatshouldjustwork.blogspot.de/2015/08/convert-cisco-1702i-ap-to-autonomous.html
Regards
Dont forget to rate helpful posts
05-16-2017 12:58 AM
Credits to Sandeep.
You're now running the k9w8 lightweight image. Follow the mentioned blogs to go to k9w7, the autonomous image.
05-16-2017 12:01 AM
Here are the posts and video to convert LAP to AAP.
https://www.youtube.com/watch?v=d7XTGGrUYBA
https://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/
https://damn.technology/convert-cisco-lightweight-ap-autonomous
https://itthatshouldjustwork.blogspot.de/2015/08/convert-cisco-1702i-ap-to-autonomous.html
Regards
Dont forget to rate helpful posts
05-16-2017 05:02 PM
Thanks for your answer.
We've solved the problem.
05-16-2017 12:58 AM
Credits to Sandeep.
You're now running the k9w8 lightweight image. Follow the mentioned blogs to go to k9w7, the autonomous image.
05-16-2017 05:01 PM
Thanks for your answer.
we've solved the problem.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide