how do convert controller-based(Unified) to standalone(Autonomous)?

[akirat001]

AIR-CAP1702I-Q-K9 is mixed environment of autonomous and lightweight access points.

But default environment is lightweight.

I want to use it with standalone AP.

how can I do？

Directory of flash:/
    2  -rwx         287   Jan 1 1970 00:17:54 +00:00  info
    3  -rwx           0   Mar 1 1993 00:00:34 +00:00  config.txt
    4  -rwx        1048   Mar 1 1993 00:00:15 +00:00  private-multiple-fs
    5  -rwx         109   Mar 1 1993 00:00:15 +00:00  env_vars
   38  drwx         576   Jan 1 1970 00:17:48 +00:00  ap3g2-rcvk9w8-mx
   48  drwx        2112   Jan 1 1970 00:24:20 +00:00  ap3g2-k9w7-mx.153-3.JAB

[Moin Ilyas]

Please refer to the following links:

http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01101010.html#ID1136

https://supportforums.cisco.com/video/11928901/lwapp-lightweight-mode-autonomous-conversion-and-vice-versa

http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/

[akirat001]

Dear  Moin Ilyas

 Thank you for your help.

 But I found mode change command in your HP.
  > capwap ap autonomous

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap1-overview.html#pgfId-1067001

So I was successful mode change.

Thank you,

[Mike Vzz]

hola akirat001,

exmple:

primer paso en el modo ligero.

1 activar depuración en modo AP  ligero

2 mode configure global

3indicate on ap dont boot image lwap ap3g2-rcvk9w8-mx

4indicate on ap boot image autonomus ap3g2-k9w7-mx.153-3.JAB

ap_getro # debug capwap con cli           
Este comando está destinado sólo para depurar / solución de problemas
Cualquier cambio de configuración puede dar lugar a diferentes
comportamientos de configuración centralizada.

CAPWAP consola CLI permitir / denegar la depuración está en

ap_getro # conf t

ap_getro (config) #no arranque flash del sistema: / ap3g2-rcvk9w8-mx / ap3g2-rcvk9w8-mx

ap_getro (config) # boot flash del sistema: /ap3g2-k9w7-mx.153-3.JAB/ap3g2-k9w7-mx.153-3.JAB

ap_getro#reload

System configuration has been modified. Save? [yes/no]: yes
Proceed with reload? [confirm]

and  the ap boot on autonomus ios

Regards