08-03-2018 11:35 PM - edited 07-05-2021 08:56 AM
Hi
Can any one help me to protect host to host communication in same vlan(SSID).Like we can block host to host communication in Cisco 2960 switch in interface command "switchport protected"
Thanks
Solved! Go to Solution.
08-04-2018 02:53 AM
If you have a single WLC, then you can use "P2P Block Action" on WLAN -> Advanced setting page as shown below.
If you have multiple WLCs & you want to do that, then you have to use your switch to do that. In that case you configure that feature with "forward-upstream" option.
HTH
Rasika
*** Pls rate all useful responses ***
08-04-2018 02:53 AM
If you have a single WLC, then you can use "P2P Block Action" on WLAN -> Advanced setting page as shown below.
If you have multiple WLCs & you want to do that, then you have to use your switch to do that. In that case you configure that feature with "forward-upstream" option.
HTH
Rasika
*** Pls rate all useful responses ***
09-08-2018 01:27 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: