11-06-2013 11:37 AM - edited 07-04-2021 01:13 AM
We are using 5508 WLC with 3602 APs.
Looks like in RADIUS Authentication Called-Station-Id is the MAC address of the AP,
but in RADIUS Accounting Called-Station-Id is the MAC address of the WLC.
How can we change that behaviour so that Called-Station-Id will always be the MAC address of the AP?
Or is there some other way to identify the actual AP to which the user is connected?
Regards
Timo
11-06-2013 12:35 PM
The WLC doesn't send the AP name in any attribute so that would not be possible. Autonomous AP's it's possible because you can specify the NAS-ID of the AP.
Sent from Cisco Technical Support iPhone App
11-06-2013 03:09 PM
Hmm, I did some trial and error and solved the problem.
On the WLC, go to Security > AAA > RADIUS > Authentication and set the Call Station ID Type to "AP MAC Address:SSID". Even tho that seems to be for RADIUS Authentication, it changes the Called-Station-Id also for RADIUS Accounting.
Thx anyway
Timo
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide