11-11-2013 08:45 AM - edited 07-04-2021 01:14 AM
Hi everyone
Hope you can help me with this. I have an Aironet 3602e that was bought as a Lightweight AP, last week need to do some testing and changed the image to an Autonomous one. Now I need to use it with a Controller, but can´t find the procedure to upgrade it to Lightweight again.
I tried the procedure of the upgrade tool, but it saids that this AP is nos supported.
Anyone who has this information please. I already had the Lightweight images.
Best Regards
Alvaro Rugama
Solved! Go to Solution.
11-11-2013 09:10 AM
HI Alvaro,
For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.
AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar
Regards
Hope it helps.
11-11-2013 09:10 AM
HI Alvaro,
For the LWAP conversion, use the recovery image. We can use this command on the autonomous AP priviledge mode.
AP#archive download-sw /force-reload /overwrite tftp://10.10.10.1/image.tar
Regards
Hope it helps.
11-11-2013 09:33 AM
Thank you very much sandeepchoudhary21
It is working right now
Best Regards.
Alvaro Rugama
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide