03-21-2021 12:36 PM - edited 07-05-2021 01:25 PM
Wondering what's the CLI to verify AP LAN interface speed on Cisco 9800 controllers...
On the AireOS controllers, you can do 'show ap stats ethernet summary'... And this command is not available on 9800 WLC.
03-21-2021 02:44 PM
To see Ethernet related configuration information of an AP, use the show ap name ap-name config ethernet command.
show ap name ap-name config ethernet [ chassis {chassis-number | active | standby} R0]
check command syntax :
03-22-2021 03:05 PM
Thanks for the reply.
The commend you refer doesn't return any output, maybe it's for AP with specific ehternet config?
Actually, found the 'show ap name [ap-name] ethernet statistics' can show the ethernet speed. However, this commend only shows 1 AP at a time. If there are hundreds of AP, then not easy to run.
03-23-2021 01:18 AM
then use 2 methods. for both out of the box scripts or SNMP
I am sure they connected to Switch.
1. you can run SNMP walk using snmpwalk or NMS tools. or script get connected port speed using any scripting methods out of the box. if you looking to generate the report.
01-25-2024 09:06 AM
Run the command show AP ethernet statistics, it'll show you there.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide