I accidentally added an interface to the wrong interface group on 5508

[bjohnson04]

I accidentally added an interface to the wrong interface group

    Interface abc to our guest interface group.  I tried disabling the abc WLAN and then removing it from the group but that didnt work.  Im still get the error "Interface group is being used by WLAN"

What do I need to do to remove this interface?

[Rasika Nayanajith]

Temporary map different interface to WLAN (under AP group & global WLAN config) & then go under interface group & remove the unwanted interface. Then you can remap the interface group to the WLAN

HTH

Rasika

*** Pls rate all useful responses ***

[magNHS]

Hi @Rasika Nayanajith 

What is the impact of perform the suggested action?

I assuming that this will lead to WLAN being unavailable while the interface group is remapped causing outage!

[Rich R]

Yes obviously so should be done during a maintenance window @magNHS 

[Flavio Miranda]

Hi

 Hopefully you dont have this interface group added to many AP group . I did the same mistake already and I had the interface group  in about 100 AP groups. I had to use a spreadsheet to run all AP group deleting and interface group. Then taking off on interface and adding the interface group back in all AP groups again.