02-18-2011 03:59 AM - edited 07-03-2021 07:50 PM
02-18-2011 05:12 AM
Hi,
make sure you have enabled HTTP on the AP..what does the console logs say?? is the AP is autonomous or LWAPP mode?? are we able to enter the commands on the AP ??
en
conf t
Whats the model number of the AP that we are using??
Regards
Surendra
02-18-2011 06:19 AM
Hi Surendra,
that what appears on the console, what I can do to know that I have enabled http?
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELE
ASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:40 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
flashfs[1]: 5 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 2625536
flashfs[1]: Bytes available: 13373440
flashfs[1]: flashfs fsck took 4 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco AIR-LAP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 24566K/81
92K bytes of memory.
Processor board ID FCZ144881QU
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: C4:71:FE:B3:8C:EC
Part Number : 73-10256-07
PCA Assembly Number : 800-26918-06
PCA Revision Number : A0
PCB Serial Number : FOC14451D0E
Top Assembly Part Number : 800-29152-03
Top Assembly Serial Number : FCZ144881QU
Top Revision Number : A0
Product/Model Number : AIR-LAP1242AG-E-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:05.384: %LWAPP-3-CLIENTEVENTLOG: Unable to open event log file fla
sh:/event.log
*Mar 1 00:00:05.385: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 0 messages)
*Mar 1 00:00:07.436: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to
up
*Mar 1 00:00:07.461: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1240 Software (C1240-RCVK9W8-M), Version 12.4(21a)JA2, RELE
ASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Mon 02-Nov-09 18:40 by prod_rel_team
*Mar 1 00:00:07.488: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:00:07.992: %CDP_PD-4-POWER_OK: Full power - AC_ADAPTOR inline power s
ource
*Mar 1 00:00:08.436: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to down
*Mar 1 00:00:36.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:00:46.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:00:56.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:01:06.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:01:16.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:01:26.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:01:36.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:01:46.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:01:56.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:02:06.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:02:16.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:02:26.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:02:36.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:02:46.403: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:02:47.222: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthern
et0, changed state to up
*Mar 1 00:02:55.841: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:03:05.718: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:03:06.721: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:03:06.724: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:05:16.724: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:05:25.358: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:05:32.232: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:05:33.235: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:05:33.237: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:07:33.237: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:07:41.866: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:07:48.740: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:07:49.743: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:07:49.745: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:09:49.745: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:09:58.373: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:10:05.248: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:10:06.250: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:10:06.252: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:12:06.253: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:12:14.882: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:12:21.756: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:12:22.759: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:12:22.761: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:14:22.761: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:14:31.389: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:14:38.264: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:14:39.266: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:14:39.269: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:16:39.270: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:16:47.899: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:16:55.773: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:16:56.774: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:16:56.776: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
*Mar 1 00:18:56.777: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
Not in Bound state.
*Mar 1 00:19:05.405: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned D
HCP address 192.168.0.164, mask 255.255.255.0, hostname APc471.feb3.8cec
Translating "CISCO-CAPWAP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.21
2)
Translating "CISCO-LWAPP-CONTROLLER.itaca-sa.com"...domain server (192.168.0.212
)
*Mar 1 00:19:13.279: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Mar 1 00:19:14.282: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER.itaca-sa.com
*Mar 1 00:19:14.284: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER.itaca-sa.com
thanks,
02-18-2011 06:37 AM
Hi,
The AP is in LWAPP mode and you neeed to convert the same to Autonomous.. so that we can access the GUI..
here is the doc that i hv written and which will help you to get the issue resolved..
https://supportforums.cisco.com/docs/DOC-14960
Lemme know how this works out for you!!
Regards
Surendra
===
Please dont forget to rate the usefull posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide