03-21-2014 01:03 PM - edited 07-05-2021 12:30 AM
I have a 6509-E with Sup WS-SUP720-3B IOS (s72033-ipservicesk9_wan-mz.122-18.SXF7)
And i need upgrade my Wism to software version 7.0.235.3, and i have a question:
I have to update the ios Supervisor? or can i upgrade to 7.0.235.3 with Supervisor IOS version 12.2(18).SXF7?
Thanks
Solved! Go to Solution.
03-21-2014 01:18 PM
There is no need to update the IOS for superviser.
You can upgrade the software for wism.
Regards
Dont forget to rate helpful posts
03-21-2014 01:18 PM
There is no need to update the IOS for superviser.
You can upgrade the software for wism.
Regards
Dont forget to rate helpful posts
03-21-2014 01:27 PM
Ok, Thanks Sandeep, but Cisco have any document for compatibility for Wism version and Sup 720 IOS Version?
Thanks
03-21-2014 01:37 PM
Hi Juan,
No I did not find any specific documents about there compatibility.
The firmware of the IOS does not decide your 6500 Supervisor. If you want to use WiSM-1, regardless of the firmware you have inside, then your supervisor card should be a Sup720 running IOS version SXF2.
So dont worry about this and go ahead with wism software upgrade.
wism last support is 7.0.x .
Regards
Dont forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide