I need Upgrade WiSM to 7.0.235.3

[Juan Ibañez]

I have a 6509-E with Sup WS-SUP720-3B IOS (s72033-ipservicesk9_wan-mz.122-18.SXF7)

And i need upgrade my Wism to software version 7.0.235.3, and i have a question:

 I have to update the ios Supervisor? or can i upgrade to 7.0.235.3 with  Supervisor IOS version 12.2(18).SXF7?

Thanks

[Sandeep Choudhary · Accepted solution]

There is no need to update the IOS for superviser.

You can upgrade the software for wism.

Regards

Dont forget to rate helpful posts

[Juan Ibañez]

Ok, Thanks Sandeep, but Cisco have any document for compatibility for Wism version and Sup 720 IOS Version?

Thanks

[Sandeep Choudhary]

Hi Juan,

No I did not find any specific documents about there compatibility.

The firmware of the IOS does not decide your 6500 Supervisor. If you want to use WiSM-1, regardless of the firmware you have inside, then your supervisor card should be a Sup720 running IOS version SXF2. 

So dont worry about this and go ahead with wism software upgrade.

wism last support is 7.0.x .

Regards

Dont forget to rate helpful posts