02-09-2008 11:58 AM - edited 07-03-2021 03:21 PM
I have a lab where Im trying to put an Microsoft IAS as RADIUS for an AIR-1130ag.
But I dont have any success.
Any ideas?.
The following output is and debug in the AP:
---------------------------------
*Mar 1 01:44:26.927: RADIUS/ENCODE(00000051):Orig. component type = DOT11
*Mar 1 01:44:26.927: RADIUS(00000051): Storing nasport 330 in rad_db
*Mar 1 01:44:26.927: RADIUS(00000051): Config NAS IP: 192.168.15.253
*Mar 1 01:44:26.931: RADIUS/ENCODE(00000051): acct_session_id: 78
*Mar 1 01:44:26.931: RADIUS(00000051): Config NAS IP: 192.168.15.253
*Mar 1 01:44:26.931: RADIUS(00000051): sending
*Mar 1 01:44:26.931: RADIUS(00000051): Send Access-Request to 192.168.15.200:1645 id 1645/22, len 166
*Mar 1 01:44:26.935: RADIUS: authenticator CF A3 C7 1E 83 0A 39 6C - 34 5C B4 DD D4 7F 7A 7C
*Mar 1 01:44:26.935: RADIUS: User-Name [1] 25 "ATRIDANETWORKS\rjimenez"
*Mar 1 01:44:26.935: RADIUS: Framed-MTU [12] 6 1400
*Mar 1 01:44:26.939: RADIUS: Called-Station-Id [30] 16 "000d.293f.da0d"
*Mar 1 01:44:26.939: RADIUS: Calling-Station-Id [31] 16 "001b.7715.6141"
*Mar 1 01:44:26.939: RADIUS: Service-Type [6] 6 Login [1]
*Mar 1 01:44:26.939: RADIUS: Message-Authenticato[80] 18 *
*Mar 1 01:44:26.939: RADIUS: EAP-Message [79] 30
*Mar 1 01:44:26.943: RADIUS: 02 02 00 1C 01 41 54 52 49 44 41 4E 45 54 57 4F [?????ATRIDANETWO]
*Mar 1 01:44:26.943: RADIUS: 52 4B 53 5C 72 6A 69 6D 65 6E 65 7A [RKS\rjimenez]
*Mar 1 01:44:26.943: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]
*Mar 1 01:44:26.947: RADIUS: NAS-Port [5] 6 330
*Mar 1 01:44:26.947: RADIUS: NAS-IP-Address [4] 6 192.168.15.253
*Mar 1 01:44:26.947: RADIUS: Nas-Identifier [32] 11 "atrida-ap"
*Mar 1 01:44:31.996: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000
*Mar 1 01:44:31.996: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22
*Mar 1 01:44:37.353: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000
*Mar 1 01:44:37.353: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22
*Mar 1 01:44:43.243: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000
*Mar 1 01:44:43.243: RADIUS: Retransmit to (192.168.15.200:1645,1646) for id 1645/22
*Mar 1 01:44:48.609: RADIUS: no sg in radius-timers: ctx 0xC67C64 sg 0x0000
*Mar 1 01:44:48.609: RADIUS: No response from (192.168.15.200:1645,1646) for id 1645/22
*Mar 1 01:44:48.609: RADIUS/DECODE: parse response no app start; FAIL
*Mar 1 01:44:48.609: RADIUS/DECODE: parse response; FAIL
*Mar 1 01:44:48.613: %DOT11-7-AUTH_FAILED: Station 001b.7715.6141 Authentication failed
02-11-2008 06:56 PM
Has the radius server been started?
I assume the radius server is on 192.168.15.200.
The logs show no reply. So maybe the service isn't started?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide