05-15-2008 07:51 AM - edited 07-03-2021 03:52 PM
Hi Guys,
Just reading up on what the DS flag is and I have the following definition below. I have also included 3 types of DS flag packets.
Are there any more flags? I have seen stuff like station did not make it to DS etc etc etc? But cannot see much documentation on this subject from the IEEEE?
Any help would be fantastic.
Kind regards,
Ken
The Distribution System (DS) Status field wlan.fcds
represents the direction the frame is
traveling in. Wireshark represents two
unique fields as one display entry:
From DS and To DS. When From DS is
set to 1 and To DS is set to 0, the frame
is traveling from the AP to the wireless
network. When From DS is set to 0 and
To DS is set to 1, the frame is traveling
from a wireless client to the AP.
Note Flags: T (To DS, I am assuming)
------------------------------------
IEEE 802.11 Data, Flags: .......T
Type/Subtype: Data (0x20)
Frame Control: 0x0108 (Normal)
Version: 0
Type: Data frame (2)
Subtype: 0
Flags: 0x1
DS status: Frame from STA to DS via an AP (To DS: 1 From DS: 0) (0x01)
.... .0.. = More Fragments: This is the last fragment
.... 0... = Retry: Frame is not being retransmitted
...0 .... = PWR MGT: STA will stay up
..0. .... = More Data: No data buffered
.0.. .... = Protected flag: Data is not protected
0... .... = Order flag: Not strictly ordered
Note Flags: F (From DS, I am assuming)
--------------------------------------
IEEE 802.11 Data, Flags: ......F.
Type/Subtype: Data (0x20)
Frame Control: 0x0208 (Normal)
Version: 0
Type: Data frame (2)
Subtype: 0
Flags: 0x2
DS status: Frame from DS to a STA via AP(To DS: 0 From DS: 1) (0x02)
.... .0.. = More Fragments: This is the last fragment
.... 0... = Retry: Frame is not being retransmitted
...0 .... = PWR MGT: STA will stay up
..0. .... = More Data: No data buffered
.0.. .... = Protected flag: Data is not protected
0... .... = Order flag: Not strictly ordered
Note Flags: FT (From DS to DS, I am assuming)
---------------------------------------------
IEEE 802.11 Data, Flags: ......FT
Type/Subtype: Data (0x20)
Frame Control: 0x0308 (Normal)
Version: 0
Type: Data frame (2)
Subtype: 0
Flags: 0x3
DS status: Frame part of WDS from one AP to another AP (To DS: 1 From DS: 1) (0x03)
.... .0.. = More Fragments: This is the last fragment
.... 0... = Retry: Frame is not being retransmitted
...0 .... = PWR MGT: STA will stay up
..0. .... = More Data: No data buffered
.0.. .... = Protected flag: Data is not protected
0... .... = Order flag: Not strictly ordered
05-16-2008 01:25 AM
This doco is excellent.
The 802.11-2007 standard from the IEEEE (cannot attach as 14 meg) download from
Thx
Ken
06-07-2024 02:21 AM
@kfarrington
Can you point out in spec from the "Table of contents", I couldn't get it.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide