IEEE 802.11k roaming with client and cisco router

[volker.obhof.w1]

I found information that Cisco supports IEEE802.11k WLAN standard with their routers.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/11rkw_DeploymentGuide/b_802point11rkw_deployment_guide_cisco_ios_xe_release33/b_802point11rkw_deployment_guide_cisco_ios_xe_release33_chapter_010.html

If read this article I think for assisted roaming I only need neigbor reports but IEEE 802.11k standard also defines several reports like channel load report etc.

Do I need these other reports also for roaming decisions if my device is a client?