implementation queries for cisco wireless AP with controller

[zaheer.jahangir1]

hello and greetings to all readers,
I am given a project to implemet cisco wireless AP's with WLC 
platforms are Catalyst 2960-X,2504 WLC and Aironet AP's
but the issue is I am not much familiar with wireless technologies can someone pleas guide me that how should i be doing this project.

Regards,
Zaheer Jahangir

[Sandeep Choudhary]

Hi,

Here is the WLC deployment guide :

http://www.cisco.com/c/en/us/support/docs/wireless/2500-series-wireless-controllers/113034-2500-deploy-guide-00.html

Basic config on switch for WLC and AP:

http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/69719-wlc-lwap-config.html

Regards

Dont forget to rate helpful posts

[zaheer.jahangir1]

Thanks Sandeep for this helpful content, it will help me for sure,
and preranda i am having total of 4 sites with each site including a total of 15 AP's.....but the issue is I am not comfortable with Wireless technologies as i Have never worked on them before
but thanks for the support now i am sure i can get some fruitful result.

[Prabath Godevithanage]

Hi Zaheer,

assuming you would have at least a dozen of APs..I would start with a small site interview and at least  with a basic site survey rather than chucking the AP's here and there.

As for the configuration,deployment guide refereed by Sandeep would be an excellent start for you to get the things going in the lab