interference

[PRASH85911]

Hello,

We are using 3702 AP's. Lot of interference is seen in the network but the problem is even 802.11b/g radio is disabled, it shows the interference of 50%, can someone help me out?

Thanks in advance

[mohanak]

Refer link : http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010001011.html#ID1143

[PRASH85911]

Thanks for the doc, but it doesnt answer my question 

[George Stefanick]

Where are you seeing this mention about interferences ? Can you take a screen shot ?

******************************************************************************

HTH

Please rate helpful post! 

www.my80211.com - Blog by a WiFi engineer for WiFi engineers

www.wifitraining.com/about-wifi/ - WiFi Training by hands on WiFi Engineers, Experts and Cisco Wireless VIPs 

[PRASH85911]

please see the attached fie for reference. Admin status is disabled but it has got channel utilization and interference of 70%. Turning off radio will disable transmit and receiving antenna?

[Rowell Dionicio]

What exactly is your question? Do you want to identify what the interference is with the WLC?

[jiflorwi]

Are you referring to Channel Utilization as reported by the Radio interface?

You mention that 802.11b radios are shut off - if thats the case - then you are not collecting interference information.

Do you know if the interference is Wi-Fi or non Wi-Fi?  A screen shot of your question will help- interference is a very big subject.