Hi wireless experts,
is there any way to check the RRM RF neighbors of APs, which are associated to a C9800 WLC?
I tried the command: "show ap name <AP-NAME> neighbor summary"
However, this command lists all the BSSIDs the corresponding AP sees.
wlc#show ap name myAP101 neighbor summar
BSSID Channel Channel-width Slot RSSI Last-Heard SSID Neighbour
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
00fc.baec.5681 1 20 Mhz 0 -23 04/06/2021 16:49:47 SAME_RF_GROUP_SSID1 FALSE
00fc.baec.5682 1 20 Mhz 0 -23 04/06/2021 16:49:47 SAME_RF_GROUP_SSID2 FALSE
00fc.baec.568a 108 20 Mhz 0 -23 04/06/2021 16:49:17 SAME_RF_GROUP_SSID1 FALSE
00fc.baec.568b 108 20 Mhz 0 -23 04/06/2021 16:49:17 SAME_RF_GROUP_SSID2 FALSE
6c8b.d3cc.c280 1 20 Mhz 0 -70 04/06/2021 16:49:47 OTHER_RF_GROUP_SSID1 FALSE
6c8b.d3cc.c282 1 20 Mhz 0 -70 04/06/2021 16:49:47 OTHER_RF_GROUP_SSID2 FALSE
So in this example output, you'll see BSSIDs of another AP on the same WLC (same RF group): BSSID starts with 00fc.baec.568
Also the output shows BSSIDs of an AP, which is not inside the WLC deployment: BSSID starts with 6c8b.d3cc.c28
For the first BSSIDs I would expect, that the "Neighbour" column is set to TRUE ... however it is not ...
I'm running IOS-XE 17.3.3
