ā05-08-2015 11:09 PM - edited ā07-05-2021 03:11 AM
Hi,
We have CISCO WLC and ASA in our office. We created a L3 vlan for guest access in firewall and dhcp server is configured for ip address distrubution. DHCP servers is reachable.
In WLC we created one more specific vlan as ingress and egress is L3 vlan.
Now users not getting the ip address who are all connected in the specific SSID. Other WLAN is working well.
Anyone have Idea..?
Regards,
Sivaguru
ā05-09-2015 06:39 PM
In WLC we created one more specific vlan as ingress and egress is L3 vlan.
Do you have multiple WLC or single WLC ? How do you set this ingress & egress vlan/interfaces on your wlan ?
Rasika
ā05-10-2015 08:36 PM
Hi,
Yes, we have 2 WLC. We have 2 vlans like 300 & 200. VLAN 300 configured in firewall and VLAN 200 is configured in Core as L2 VLAN.
We are using VLAN 300 is WiFi purpose and VLAN 200 is using wired for guest access.
In WLC egress interface is VLAN 300 and Ingress interface is VLAN 200.
Now the issue with VLAN 200..
Regards
Sivaguru D
ā08-03-2015 12:30 PM
an you share the below :
show interface detailed <interface name of vlan 300>
show interface detailed <interface name of vlan 200>
show wlan <wlan ID of the guest WLAN>
ā08-03-2015 01:24 AM
Hi,
which DHCP server you have configured in your environment is it external DHCP server or WLC's Internal DHCP Server. ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide