01-19-2021 09:05 AM - edited 07-05-2021 01:02 PM
Hi,
I try to setup IPv6 on the WLC 5520 (8.8.130), for only the WIFI Clients not for the WLC and APs.
I found this from Cisco https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-0/IPV6_DG.html#pgfId-76851
and now maybe someone can help me out with some questens?
Is this importent for me "Prior to Release 8.0, APs did not require connectivity to an IPv6 network, as all traffic is encapsulated inside the IPv4 CAPWAP tunnel between the AP and the controller." and is necessary to activate multicast?
My setup:
Managment Interface:
VLAN for WLC and APs IPv4 only
Dynamic Interface for WIFI:
VLAN with IPv4 and IPv6 DHCP per Router
thanks for your help
Regards
Martin
01-21-2021 11:52 AM
I haven't enabled it in my network, but generally it's a good idea to have Multicast working with IPv6, as Broadcast was replaced by Multicast.
01-25-2021 09:31 AM
Should I switch the managmant vlan and CAPWAP tunnel from IPv4 to IPv6, is there any good reason to do so?
01-25-2021 11:44 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide