10-26-2020 07:46 AM - edited 07-05-2021 12:42 PM
Can you configure a RF Profile to disable 2.4 GHZ only on a 8540 WLC version 8.10.121.0?
I have configured a global setting to lower the 2.4 GHz radio to 5 but I'm finding that some area's I would like to disable the 2.4 GHz per radio AP group.
Thank you
Solved! Go to Solution.
10-26-2020 08:31 AM
Hi,
To be clear under > ap group > RF profile if I only select NONE then it will disable the 2.4 GHz Radio and not take the global setting for it?
Thank you
12-03-2020 08:50 AM
Found the answer on how to do this on per AP Group - you would use the radio policy setting found at the right side of the ssid blue pull down arrow.
10-26-2020 08:18 AM
Hi
You can turn the 2.4Ghz radio off or you can propagate the SSID in 5.0Ghz only. Both ways, 2.4Ghz frequency will be no longer available.
10-26-2020 08:31 AM
Hi,
To be clear under > ap group > RF profile if I only select NONE then it will disable the 2.4 GHz Radio and not take the global setting for it?
Thank you
12-03-2020 08:50 AM
Found the answer on how to do this on per AP Group - you would use the radio policy setting found at the right side of the ssid blue pull down arrow.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide