05-28-2020 09:32 AM - edited 07-05-2021 12:06 PM
Afternoon,
Can anyone tell me if the ISR 1109 supports either the Workgroup Bridge or Universal Client modes of operation? All the documentation I have read on both configurations appear to reference a dot11radio interface, which the 1109 doesn't appear to have, at least not in that format.
If it does support either of these modes, or something similar, can anyone point me in the direction of some suitable documentation?
Many thanks in advance
Solved! Go to Solution.
05-28-2020 11:06 AM
I do not think it will support WGB mode. As per below, it can only operate in CAPWAP mode or Mobility Express mode AP.
HTH
Rasika
*** Pls rate all useful responses ***
05-28-2020 11:06 AM
I do not think it will support WGB mode. As per below, it can only operate in CAPWAP mode or Mobility Express mode AP.
HTH
Rasika
*** Pls rate all useful responses ***
06-01-2020 01:28 AM
Many thanks for the response, we are trying to use the 1109 to act as a simple Wi-Fi extender, allowing wired clients behind it to access a Hotel or SOHO W-Fi network to gain internet access. Is the 1109 capable of this? If so, is there any documentation anywhere?
06-01-2020 02:46 PM
As long as you have a wireless controller, you can get that 1109 integrated AP to register with that controller, so it will work as any other AP. So this will allow your wireless client to connect to AP and then back to your WLC/Network.
This will not help your wired clients though. Your 1109 Router should connect via WAN connectivity (Ethernet,4G/LTE), cannot backhaul using WiFi over integrated AP as it only supports ME/CAPWAP mode.
HTH
Rasika
*** Pls rate all useful responses ***
06-02-2020 12:52 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide