09-08-2012 07:02 AM - edited 07-03-2021 10:38 PM
Experts,
I encounted the issue of upgrading 300 Aironet 1100 series i.e. 1121 to newly bought WLC.
Problem is 1100 are using SSC cert that I must do " debug pm pki enable " on each of 300 AP upgrading to extract its key-hash then copy to Security>AAA>AP Policy and repeat for 300 times. It is the impossible task.
What would you recommend us to do the any other methods to achive the same goal?
All suggestions r welcome, Thx in advance.
Nipat.p
Solved! Go to Solution.
09-08-2012 07:27 AM
Take a look at the upgrade tool
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161111
Sent from Cisco Technical Support iPhone App
09-08-2012 07:27 AM
Take a look at the upgrade tool
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161111
Sent from Cisco Technical Support iPhone App
09-08-2012 04:22 PM
I encounted the issue of upgrading 300 Aironet 1100 series i.e. 1121 to newly bought WLC.
Careful now. Make sure you go through the Software Release Support for Access Points to know which WLC firmware can support your old 1120 WAPs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide