Issue with Toshiba FlashAir on AP1142

[Brian I]

Hi

 Some time ago, I had FlashAir Wifi SD Card connecting to wifi without any issues...

Now, running with an AP1142, the WiFi SD card connects for approx 10 seconds (the is the time I get ping reply from it), and then the connection is dropped again.

What causes the drop ?

A bit of debug gives me:

Jan  3 08:25:07.728: %DOT11-6-ASSOC: Interface Dot11Radio0, Station   ec21.e53c.eb9e Associated KEY_MGMT[WPAv2 PSK]

Jan  3 08:25:22.614: %DOT11-4-MAXRETRIES: Packet to client ec21.e53c.eb9e reached max retries, removing the client

Jan  3 08:25:22.615: dot11_auth_client_abort: Received abort request for client ec21.e53c.eb9e

Jan  3 08:25:22.615: dot11_auth_client_abort: No client entry to abort: ec21.e53c.eb9e for application 0x1

Jan  3 08:25:22.615: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ec21.e53c.eb9e Reason: Previous authentication no longer valid

Jan  3 08:25:22.618: %DOT11-4-MAXRETRIES: Packet to client ec21.e53c.eb9e reached max retries, removing the client

The FlashAir card is a "closed" system, so I cannot update drivers or similar - and the card runs the latest firmware available..

Any hints on what could be the issue ?

Regards

Brian

[balaji.bandi]

This loooks for me nothing seems to be wrong on the AP side, have you tried any other device like Laptop to produce the problem ?

I would not rely on only 1 device failure as issue, this could be end device issue, if all device not connecting to AP then that looks for me different issue.

AP1142 - retired long back in 2018.

[marce1000]

 - As was already replied , 1142 is ancient , use modern wireless infrastructure , 

M.