10-22-2019 02:46 AM - edited 07-05-2021 11:11 AM
(Sorry for bad English)
Hello,
We have a WLC 5508 with the system version 8.5.151.0. On that WLC we have 3 types of AP associated :
- Access point 1532
- Access point 2602
- Access point 2802
Last week all of 2802 lose the association with the WLC, and it was impossible to re-associate those AP...
As a temporary solution we moved all of 2802 on our Main WLC which is located in an other country which is not the best practice.
Note that 1532 and 2602 AP don't have any issues and are still associated to the WLC, we didn't made any change or update on the WLC.
Now when we try to force the association with the WLC, they automatically re-associate with the Main WLC...
Am I missing something here ?
Did you guys experienced something similar ?
10-22-2019 03:23 AM
10-22-2019 04:50 AM
This is the complete output :
(Cisco Controller) >show time
Time............................................. Tue Oct 22 13:46:57 2019
Timezone delta................................... 0:0
Timezone location................................ (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
NTP Servers
NTP Version.................................. 3
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server Status NTP Msg Auth Status
------- ---------------------------------------------------------------------
2 0 10.0.9.2 In Sync AUTH DISABLED
(Cisco Controller) >
10-22-2019 02:22 PM
10-12-2020 08:01 PM
Doesn't mean to hijack this thread.
Just wanna ask simple question
My friend installing vWLC with 2802e Firmware 8.5.140.0
AFAIK 8.5.140.0 is Mobility Express firmware
I only know CAPWAP firmware work with vWLC/WLC
Anyone know whether ME firmware will work with vWLC?
tq
10-12-2020 08:38 PM
Won't work. The AP needs to be converted to CAPWAP in order for the AP to join a WLC.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide