cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1736
Views
5
Helpful
23
Replies

l need help cisco

lisavbedt
Level 1
Level 1

l have ordered 25 cisco used but l cant configure l put en then conf t it says input marker

l have smc switch how configure cisco is so hard someone help with cisco 

wlc could not discover  dhcp ip

23 Replies 23

can you explain more detail about wlc could not discover dhcp ip

you mean management ip ? what is the wlc model? and how do you config it ?

*Mar 1 00:17:18.013: %CAPWAP-3-STATIC_TO_DHCP_IP: Could not discover WLC using static IP. Forcing AP to use DHCP

it says it l dont how confgure it someone can help would be useful

model air-LAP1142N-E-K9 

l dont have cisco controller switch l have only router ip 192.168.178.1 how configure l dont know it l watched video how to confiure didn help not so useful

connect console cable to ap 

"ap>enable

ap#conf t

ap(config)#int bv1

ap(config-if)#ip add x.x.x.x x.x.x.x

ap(config-if)#end

lisavbedt
Level 1
Level 1

l typed i didn work it says invaild input marker

l cant configure 

You need to have a console cable and then console into the ap.  Search for FTDI USB to RJ45
https://www.amazon.com/OIKWAN-Compatible-Opengear-Aruba%EF%BC%8CJuniper-Switches/dp/B075V1RGQK/ref=sxin_16_pa_sp_search_thematic_sspa?content-id=amzn1.sym.824ce8c0-071d-4ae0-a0bd-93ac8c4d5e37%3Aamzn1.sym.824ce8c0-071d-4ae0-a0bd-93ac8c4d5e37&cv_ct_cx=...

If the ap's are leap like the model you posted "LAP" then you need a controller.
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/70278-lap-faq.html

Also the "E" on the model you have means, requires an external antenna.  So you need to make sure you have the proper antenna for your environment.

-Scott
*** Please rate helpful posts ***

16780401721494172562677628725775.jpg

no l have one famale cable to rj45 why do need another one? ask qustion

 

You don't.... the point was if you didn't have one and wanted to get one.  As long as it works and you can get output from the console you are fine.

-Scott
*** Please rate helpful posts ***

lisavbedt
Level 1
Level 1

ask qustion l dont how configure it model is air-LAP1142N-E-K9  input marker l need confiugre it but l dont know how 

open console enable ok when l put typed conf t it says input marker

air-LAP1142N-E-K9 model you see lap sign l dont have cisco wireless controller how the hell do configure that cisco airnet

someone can help us with idea 

You need a wireless lan controller with the model of ap you have.  IF you wanted to not use a wireless lan controller, you should have purchased air-ap11142n-e-k9.  You can try to convert it, but you will need to search the internet for the image.

https://community.cisco.com/t5/wireless/how-to-convert-a-cisco-ap-from-lightweight-to-autonomous-cap-to/td-p/3067866

-Scott
*** Please rate helpful posts ***

air-LAP1142N-E-K9  - what are you trying to configured, if the AP is configured already you need to reset to factory ?

here is the configuration guide :

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap4-first.html

 

Note as suggested above, you need to connect the console and post the complete output here (in TEXT File) so we understand what is wrong with the AP, why you are not able to configure so on.

l don't have a cisco wireless controller how the hell do configure that cisco AP  <--- what is your goal of buying used AP  here ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

l reset it but it still saying dhcp and wlc error

l ordered cisco by marktplace used 

You ordered the wrong model.

-Scott
*** Please rate helpful posts ***

l cant reteurn and l kind wireless controller do l needed ? do ever controller to this ap?

like this onecisco-wireless-lan-controller-2100-series-1.jpg

you should look for a WLC 2504 and make sure it has this code version 8.3.150.0. Here is a matrix of the supported code for the 1140.

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Also take a look at the section where they show AireOS controllers and the supported code versions:

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#ctrl-sw_rls

 

-Scott
*** Please rate helpful posts ***
Review Cisco Networking for a $25 gift card