cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
295
Views
0
Helpful
3
Replies

LAN controller

Mubarak ali Ali
Level 1
Level 1

Dear All ,

 

I have Cisco Wireless LAN controller AIR-CT5508-K9 ,I had created a Web Authentication page for Guest VLAN users ,its giving the error "ERR_CERT_DATE_INVALID" when the users trying to access web-auth Page .

Kindly support me for the issue.

 

Thanks.,

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

If you haven't installed a 3rd party certificate, your guest users will see a certificate error because the wlc uses a self signed certificate. If your on v7.2, I believe that's the code this feature was introduced a, you can disable https for web auth.  This way you don't get a cert error.

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html#httpnots

-Scott

-Scott
*** Please rate helpful posts ***

Abhishek Abhishek
Cisco Employee
Cisco Employee
  • Try to set your date one day ahead of today.
  • Close than open your browser again. Hope it would work

mohanak
Cisco Employee
Cisco Employee

the real workaround is disabling HTTPs, and SSH (everything related to certificates) then save configuration and then a reload is a MUST.

MAKE SURE YOUR SYSTEM DATETIME IS CORRECT.  Check the little clock in the bottom right of the Windows taskbar.

Review Cisco Networking for a $25 gift card