cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2802
Views
0
Helpful
5
Replies

Last disassociation reason- "Proprietary failure"

awatson20
Level 4
Level 4

We have ipads that will stop communicating at random times on a WPA2/PSK WLAN on a 5520 with 2802i access points, operating on software code 8.5.135.0.  We see this error message.  I have not been able to determine what this means, and Cisco has not been able to give a good explanation.  I have attached a screenshot.  Has anyone on here seen this? Thanks.

 

5 Replies 5

marce1000
VIP
VIP

 

 https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvg14346/?rfs=iqvred

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

I saw this bug, but not much information on it or if 8.5.135.0 is affected.

1. Raise a TAC Case. I agree with Marce and I believe this is CSCvg14346.
2. I've used 8.5.135.0 before and I'll never recommend anyone use that version.

We are in the process of upgrading to 8.5.151.0. Thank you.

 

 - Consider the worst-case-scenario in that case. But note also that apparently this is not a Cisco bug ; but apparently an Apple bug. 

 M.



-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
    When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '
Review Cisco Networking for a $25 gift card