Layer 2 and Layer 3 security

[LucaSalvatore_2]

Is it possible to have Layer 2 security such as WPA2 configured with a Web Authentication policy as well?

We have a guest wireless network which uses a web authenticaion policy.  However there is no Layer 2 security configured.  When i try to enable Layer 2 security (WPA+WPA2 - AES, CCKM) i get the following error

The following errors occuring while updating the WLAN

Invalid Security Policy: [Webauth Auto Anchor WPA/WPA2]

Any thoughts

[Elliott Shawd]

According to this document, it is possible to do what you want to do. Note that they used a controller on version 5.0:

http://www.cisco.com/en/US/products/ps6366/products_tech_note09186a0080987b7c.shtml

As far as configuring it, here are links to the configuration guides for all versions of controller code and WCS, respectively:

http://www.cisco.com/en/US/products/ps6366/products_installation_and_configuration_guides_list.html

http://www.cisco.com/en/US/products/ps6305/products_installation_and_configuration_guides_list.html