LEAP authentication fails; what this 'debug aaa acc' output means ?

[news2010a]

I attempt to authenticate from laptop (LEAP client) and I am unsuccessful. Can you help me figure out what's wrong ?

Observation:Please find attached output of 'debug aaa authentication' from the respective Cisco Aironet and 'ACS Failed Attempts' log.

Please note that on ACS 3.3, "Network Configuration", "Devices->AAA Client Setup for AP1", I input a value for the "Key" field. However, I didn't find such "Key" in my access point configuration as shown in the attached file. Can you please confirm whether I should setup such "Key" and what would be the command to do so in the access point ?

Thanks much !

Marlon

[Stephen Rodriguez · Accepted solution]

Marlon,

at the end of this command:

radius-server host 163.77.93.83 auth-port 1645 acct-port 1646

you can add key 0 and the key you defined on the AAA server.