12-02-2014 10:59 AM - edited 07-05-2021 02:03 AM
Is there a way to limit the number of logins from a particular set of credentials in Cisco Prime 2.1? I want to set a maximum of 2 logins from a particular user on the wlan. I have a guest wlan using layer 3 security and an internal wlan using RADIUS (Windows). Would appreciate the help
Solved! Go to Solution.
12-02-2014 12:37 PM
There is, but it isn't due to PI. It is a function of the WLC itself.
Under Security, there is a Concurrent User Login, set to 0(which is default) it is unlimited logins. This value can be changed to be the number of concurrent logins that work for your situation.
Be advised, this is not a Per WLAN setting, it is a controller wide setting.
HTH,
Steve
12-02-2014 12:37 PM
There is, but it isn't due to PI. It is a function of the WLC itself.
Under Security, there is a Concurrent User Login, set to 0(which is default) it is unlimited logins. This value can be changed to be the number of concurrent logins that work for your situation.
Be advised, this is not a Per WLAN setting, it is a controller wide setting.
HTH,
Steve
12-10-2019 03:15 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide