cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2035
Views
5
Helpful
5
Replies

Limit SSH unsuccessful attempts WLC

Max Wooks
Level 1
Level 1

Is it possible to limit the unsuccessful ssh attempts to for MGMT access on the WLC (software version  8.5.105)? I would like to limit the unsuccessful attempts to 3 in a row.

1 Accepted Solution

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

I dont think you can limit the unsuccessful attempt on WLC.

 

Only these config possible : Go to 

Management > Telnet-SSH 

 

Regards

Dont forget to rate helpful posts

View solution in original post

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame
after 3 unsuccessful SSH attempt any device will kick you out.


@Leo Laohoo wrote:
after 3 unsuccessful SSH attempt any device will kick you out.

Currently the WLC is 5 unsuccessful attempts during SSH not the requested 3.

Sandeep Choudhary
VIP Alumni
VIP Alumni

I dont think you can limit the unsuccessful attempt on WLC.

 

Only these config possible : Go to 

Management > Telnet-SSH 

 

Regards

Dont forget to rate helpful posts


@Sandeep Choudhary wrote:

I dont think you can limit the unsuccessful attempt on WLC.

 


Documentation guide for 8.5.105 doesn't have that for an option. Looks like you're correct.

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/administration_of_cisco_wlc.html

As I told ...it not possible to set the limit on WLC.

 

Regards

Dont forget to rate helpful posts

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card