cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2045
Views
5
Helpful
5
Replies

Limit SSH unsuccessful attempts WLC

Max Wooks
Level 1
Level 1

Is it possible to limit the unsuccessful ssh attempts to for MGMT access on the WLC (software version  8.5.105)? I would like to limit the unsuccessful attempts to 3 in a row.

1 Accepted Solution

Accepted Solutions

Sandeep Choudhary
VIP Alumni
VIP Alumni

I dont think you can limit the unsuccessful attempt on WLC.

 

Only these config possible : Go to 

Management > Telnet-SSH 

 

Regards

Dont forget to rate helpful posts

View solution in original post

5 Replies 5

Leo Laohoo
Hall of Fame
Hall of Fame
after 3 unsuccessful SSH attempt any device will kick you out.


@Leo Laohoo wrote:
after 3 unsuccessful SSH attempt any device will kick you out.

Currently the WLC is 5 unsuccessful attempts during SSH not the requested 3.

Sandeep Choudhary
VIP Alumni
VIP Alumni

I dont think you can limit the unsuccessful attempt on WLC.

 

Only these config possible : Go to 

Management > Telnet-SSH 

 

Regards

Dont forget to rate helpful posts


@Sandeep Choudhary wrote:

I dont think you can limit the unsuccessful attempt on WLC.

 


Documentation guide for 8.5.105 doesn't have that for an option. Looks like you're correct.

 

https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config-guide/b_cg85/administration_of_cisco_wlc.html

As I told ...it not possible to set the limit on WLC.

 

Regards

Dont forget to rate helpful posts

Review Cisco Networking products for a $25 gift card