line vty 0 4 settings via GUI

[p1x1edust]

Is there a way to change the line vty 0 4 settings using a web browser. My current config somehow go the no login command placed on the vty and I'm trying to prevent having to connect via the console port.

[BRYN JONES]

Hi

Are you using LWAPP?

If so then the following will allow telnet:

Q.   Can I Telnet/SSH into an LWAPP based access point?

A. In Wireless LAN Controller release 5.0 and later, the controller       supports the use of Telnet or Secure Shell (SSH) protocols to troubleshoot       lightweight access points. You can use these protocols in order to make       debugging easier...

In order to enable Telnet or SSH connectivity on an access point, use       the config ap {telnet | ssh} command. The Cisco       lightweight access point associates with this Cisco Wireless LAN controller for       all network operation and in the e...

config ap {telnet | ssh} {enable | disable} Cisco_AP

Examples

> config ap telnet enable cisco_ap1
> config ap telnet disable cisco_ap1
> config ap ssh enable cisco_ap2
> config ap ssh disable cisco_ap2

[p1x1edust]

I'm not using LWAPP or a cisco controller.

[Chris Illsley]

Services -> Telnet/SSH

Is that what you want to know?

Cheers

Chris