Link Latency on WLC (just show option?)

[Sebastian Helmer]

Hi,

I'm interested in the Link Latency feature we can configure on the WLC per AP. Is it just a show option to show me how the latency is and thats all?

If found no more information in the guides so I just want to discuss that with you friends here.

thanks

regards,

Sebastian

[Saravanan Lakshmanan · Accepted solution]

yes.

http://www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70lwap.html#wp1344052

[Sebastian Helmer]

Yes thats the only doc i see about this.thanks for your reply

[Saravanan Lakshmanan]

Thanks.

on cli:-

AP#show ap config general cisco-ap

.

.

.

.

.

AP Link Latency.................................. Enabled

Current Delay................................... 0 ms

Maximum Delay................................... 240 ms

Minimum Delay................................... 0 ms

Last updated (based on AP Up Time).............. 4 days, 06 h 17 m 20 s

Adding other latency info.

config hreap join min-latency:-

http://www.cisco.com/en/US/docs/wireless/controller/6.0/command/reference/cli60.html#wp9479312

config nmsp notify-interval measurement:-

http://www.cisco.com/en/US/docs/wireless/controller/6.0/command/reference/cli60.html#wp5772656