cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
689
Views
5
Helpful
6
Replies

live in USA and have an ap with regulatory domain -UX, please help me

Luca Pecchiari
Beginner
Beginner

Hello guys,

 

ATTENTION: what i kindly request are not sensible data, but please help me!!!

 

i have an AIR-AP3702I-UXK9, autonomous, no wlc. App to prime is no longer avaiabile, read half internet and all solution found leads to a dead end.

i have discovered that flash:env_vars contains also the following lines that are written when you prime the ap and set the regulatory domain:

UAP_5G_RADIO_CARRIER_SET=C
UAP_OVERRIDE_ENABLE=no
UAP_PRIMED_COUNTRY=DE
UAP_RADIO_CARRIER_SET=1

i need to change it to USA not to Germany.

If you want to help and you use the USA regulatory domain -A or -B and your ap end with UX like (AIR-AP3702I-UXK9) , just ssh on a similar ap and do:

 

# ssh -youraccesspoint-

# more env_vars

and please post me just that 4 lines.

I ensure that is not a sensible data.

 

Thank you

 

6 Replies 6

Luca Pecchiari
Beginner
Beginner

Please guys, help!

Luca Pecchiari
Beginner
Beginner

guys, please help

Do you have a WLC?

 

 

Check this post about manual or automatic priming:

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html#pgfId-87952

 

Regards

Dont forget to arte helpful posts

Luca Pecchiari
Beginner
Beginner

no, it is autonomous, i tryed with an app found on internet but it does not work.

 

i have read all about p