08-15-2011 03:40 PM - edited 07-03-2021 08:34 PM
Hi my name is Ivan
I have a question:
How can i configuring local eap in cisco wireless lan controller with active directory and using PEAP MSCHAPv2 to authenticate the users in the wlan? Do you have any documents to do it?.
thanks for your answers
Regards.
Ivan.
08-15-2011 05:22 PM
Hi,
You cannot directly integrate AD into the WLC< we need the RADIUS in between.. so we need Either IAS or the ACS server in the middle.
The only other way is to use WLC + LDAP and here is the link..
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml
Or PEAP using Microsoft IAS..
http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080921f67.shtml
Lemme know if this helps and please dont for get to rate the usefull posts!!
Regards
Surendra
08-15-2011 08:34 PM
hi Surendra thanks for your answer
Is posible to configuring eap with peap in the wlc without work with the active directory just only in the wlc?
If I to do it, my users will be authenticate with the local net users?
I would like to work local eap with peap in the wlc but the users ?
08-18-2011 09:30 PM
yes you can do that.. the username and the password will be on the WLC >> Local Net Users...
Please dont forget to rate the usefull posts!!
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide